-
Piezoelectric Quartz Dynamic Weighing Sensor CET8312
CET8312 Piezoelectric Quartz Dynamic Weighing Sensor has the characteristics of wide measuring range, good long-term stability, good repeatability, high measurement precision and high response frequency, so it is especially suitable for dynamic weighing detection. It is a rigid, strip dynamic weighing sensor based on piezoelectric principle and patented structure. It is composed of piezoelectric quartz crystal sheet, electrode plate and special beam bearing device. Divided into 1-meter, 1.5-meter, 1.75-meter, 2-meter size specifications, can be combined into a variety of dimensions of road traffic sensors, can adapt to the dynamic weighing needs of the road surface.
-
Piezoelectric Traffic Sensor for AVC (Automatic Vehicle Classification)
The CET8311 intelligent traffic sensor is designed for permanent or temporary installation on the road or under the road to collect traffic data. The unique structure of the sensor allows it to be mounted directly under the road in a flexible form and thus conforms to the contour of the road. The flat structure of the sensor is resistant to road noise caused by bending of the road surface, adjacent lanes, and bending waves approaching the vehicle. The small incision on the pavement reduces damage to the road surface, increases installation speed, and reduces the amount of grout required for installation.
-
Infrared Light Curtain
Dead-zone-free
Sturdy construction
Self-diagnosis function
Anti-light interference -
Infrared Vehicle
Intelligent heating function.
Self-diagnostic function.
Detection output Alarm output function.
RS 485 series communication.
99.9% precision for Vehicle separation.
Protection Rating: IP67. -
Wim System Control Instructions
System Overview Enviko quartz dynamic weighing system adopts Windows 7 embedded operating system, PC104 + bus extendable bus and wide temperature level components. The system is mainly composed of controller, charge amplifier and IO controller. The system collects data of dynamic weighing sensor (quartz and piezoelectric), ground sensor coil (laser ending detector), axle identifier and temperature sensor, and processes them into complete vehicle information and weighing information, including... -
CET-DQ601B Charge Amplifier
Function overview CET-DQ601B charge amplifier is a channel charge amplifier whose output voltage is proportional to the input charge. Equipped with piezoelectric sensors, it can measure the acceleration, pressure, force and other mechanical quantities of objects. It is widely used in water conservancy, power, mining, transportation, construction, earthquake, aerospace, weapons and other departments. This instrument has the following characteristic. 1).The structure is reasonable, the circuit ... -
Non-contact axle identifier
Introduction The intelligent non-contact axle identification system automatically recognizes the number of axles passing through the vehicle through the vehicle axle detection sensors installed on both sides of the road, and gives the corresponding identification signal to the industrial computer; The design of the implementation plan of the freight loading supervision system such as entrance pre-inspection and fixed overrunning station; this system can accurately detect the number ... -
AI instruction
Based on the self-developed deep learning image algorithm development platform, the high-performance data flow chip technology and AI vision technology are integrated to ensure the accuracy of the algorithm; the system is mainly composed of an AI axle identifier and an AI axle identification host, which are used to identify the number of axles, Vehicle information such as axle type, single and twin tires. system Features 1). accurate identification Can accurately identify the number...
