OEM/ODM China Surface Acoustic Wave Temperature Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko

Short Description:

Product Detail

Product Tags

Feedback (2)

owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for Load Measuring Pin, Safe Box Malaysia, Wim Quartz Sensor, We can customize the products according to your requirements and we can pack it for you when you order.

OEM/ODM China Surface Acoustic Wave Temperature Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko Detail:

Technical Parameters

Cross section dimensions	（48mm+58mm）*58 mm
Length	1m, 1.5m, 1.75m, 2m
Wheel weighing range	0.05T～35T
Overload capacity	150%FS
Load sensitivity	2±5%pC/N
Speed range	（0.5～100）km/h
Protection grade	IP68	Output impedance	>1010Ω
Working temp.	-45～80℃	Output temperature effect	<0.04%FS/ ℃
Electrical connection	High frequency static noise coaxial cable
Bearing surface	Bearing surface can be polished
Nonlinear	≤±2% FS (precision of static calibration of sensors at each point)
Consistency	≤±4% FS (static calibration accuracy of different position points of the sensor)
Repetitiveness	≤±2% FS (precision of static calibration of sensors at the same position)
Integrated precision error	≤±5%

Installation Method

Installation Notices

5.1It is strictly prohibited to use the sensor beyond range and operating temperature for a long time.
5.2It is strictly prohibited to measure the insulation resistance of the sensor with a high resistance meter above 1000V.
5.3Non-professional personnel are strictly prohibited to verify it.
5.4The measuring medium should be compatible with aluminum materials, otherwise special instructions are required when ordering.
5.5The output end of sensor L5/Q9 should be kept dry and clean during measurement, otherwise the signal output is unstable.
5.6The pressure surface of the sensor shall not be struck with a blunt instrument or heavy force.
5.7The bandwidth of the charge amplifier shall be higher than that of the sensor, except there is no special requirement for frequency response.
5.8The installation of sensors should be carried out in strict accordance with the relevant requirements of the instructions in order to achieve accurate measurement.
5.9If there is strong electromagnetic interference near the measurement, certain shielding measures should be taken.
5.10The cable of the sensor and the charge amplifier must use a coaxial cable with high frequency static noise.

Attachments

Manual 1 PCS
Qualification of verification 1 PCS Certificate 1 PCS
Hangtag 1 PCS
Q9 output cable 1 PCS

Product detail pictures:

Related Product Guide:

We insist on offering premium quality creation with very good company concept, honest product sales along with the finest and fast assistance. it will bring you not only the premium quality item and huge profit, but the most significant is to occupy the endless market for OEM/ODM China Surface Acoustic Wave Temperature Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko, The product will supply to all over the world, such as: Algeria, France, Eindhoven, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Acoustic Wave Sensor