New Arrival China Surface Acoustic Wave Torque Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko

Short Description:

Product Detail

Product Tags

Feedback (2)

abide by the contract", conforms on the market requirement, joins from the market competition by its good quality likewise as provides more comprehensive and superb support for customers to let them become large winner. The pursue of the company, is definitely the clients' pleasure for Lidar Vehicle, Safe Box Malaysia, Elevate Software, With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees.

New Arrival China Surface Acoustic Wave Torque Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko Detail:

Technical Parameters

Cross section dimensions	（48mm+58mm）*58 mm
Length	1m, 1.5m, 1.75m, 2m
Wheel weighing range	0.05T～35T
Overload capacity	150%FS
Load sensitivity	2±5%pC/N
Speed range	（0.5～100）km/h
Protection grade	IP68	Output impedance	>1010Ω
Working temp.	-45～80℃	Output temperature effect	<0.04%FS/ ℃
Electrical connection	High frequency static noise coaxial cable
Bearing surface	Bearing surface can be polished
Nonlinear	≤±2% FS (precision of static calibration of sensors at each point)
Consistency	≤±4% FS (static calibration accuracy of different position points of the sensor)
Repetitiveness	≤±2% FS (precision of static calibration of sensors at the same position)
Integrated precision error	≤±5%

Installation Method

Installation Notices

5.1It is strictly prohibited to use the sensor beyond range and operating temperature for a long time.
5.2It is strictly prohibited to measure the insulation resistance of the sensor with a high resistance meter above 1000V.
5.3Non-professional personnel are strictly prohibited to verify it.
5.4The measuring medium should be compatible with aluminum materials, otherwise special instructions are required when ordering.
5.5The output end of sensor L5/Q9 should be kept dry and clean during measurement, otherwise the signal output is unstable.
5.6The pressure surface of the sensor shall not be struck with a blunt instrument or heavy force.
5.7The bandwidth of the charge amplifier shall be higher than that of the sensor, except there is no special requirement for frequency response.
5.8The installation of sensors should be carried out in strict accordance with the relevant requirements of the instructions in order to achieve accurate measurement.
5.9If there is strong electromagnetic interference near the measurement, certain shielding measures should be taken.
5.10The cable of the sensor and the charge amplifier must use a coaxial cable with high frequency static noise.

Attachments

Manual 1 PCS
Qualification of verification 1 PCS Certificate 1 PCS
Hangtag 1 PCS
Q9 output cable 1 PCS

Product detail pictures:

Related Product Guide:

We constantly carry out our spirit of ''Innovation bringing advancement, Highly-quality guaranteeing subsistence, Administration selling advantage, Credit rating attracting buyers for New Arrival China Surface Acoustic Wave Torque Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko, The product will supply to all over the world, such as: Kuwait, Seattle, Birmingham, Due to our strict pursues in quality, and after-sale service, our product gets more and more popular around the world. Many clients came to visit our factory and place orders. And there are also many foreign friends who came for sight seeing, or entrust us to buy other stuff for them. You are most welcome to come to China, to our city and to our factory!

Acoustic Wave Sensor Working Principle