Manufacturer for Pressure Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
Manufacturer for Pressure Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko Detail:
Technical Parameters
| Cross section dimensions | （48mm+58mm）*58 mm | ||
| Length |
1m, 1.5m, 1.75m, 2m |
||
| Wheel weighing range | 0.05T～35T | ||
| Overload capacity | 150%FS | ||
| Load sensitivity | 2±5%pC/N | ||
| Speed range |
（0.5～100）km/h |
||
| Protection grade |
IP68 |
Output impedance |
>1010Ω |
| Working temp. |
-45～80℃ |
Output temperature effect |
<0.04%FS/ ℃ |
| Electrical connection | High frequency static noise coaxial cable | ||
| Bearing surface | Bearing surface can be polished | ||
| Nonlinear | ≤±2% FS (precision of static calibration of sensors at each point) | ||
| Consistency | ≤±4% FS (static calibration accuracy of different position points of the sensor) | ||
| Repetitiveness | ≤±2% FS (precision of static calibration of sensors at the same position) | ||
| Integrated precision error |
≤±5% |
||
Installation Method
Installation Notices
5.1It is strictly prohibited to use the sensor beyond range and operating temperature for a long time.
5.2It is strictly prohibited to measure the insulation resistance of the sensor with a high resistance meter above 1000V.
5.3Non-professional personnel are strictly prohibited to verify it.
5.4The measuring medium should be compatible with aluminum materials, otherwise special instructions are required when ordering.
5.5The output end of sensor L5/Q9 should be kept dry and clean during measurement, otherwise the signal output is unstable.
5.6The pressure surface of the sensor shall not be struck with a blunt instrument or heavy force.
5.7The bandwidth of the charge amplifier shall be higher than that of the sensor, except there is no special requirement for frequency response.
5.8The installation of sensors should be carried out in strict accordance with the relevant requirements of the instructions in order to achieve accurate measurement.
5.9If there is strong electromagnetic interference near the measurement, certain shielding measures should be taken.
5.10The cable of the sensor and the charge amplifier must use a coaxial cable with high frequency static noise.
Attachments
Manual 1 PCS
Qualification of verification 1 PCS Certificate 1 PCS
Hangtag 1 PCS
Q9 output cable 1 PCS
Product detail pictures:
Related Product Guide:
We stay with the basic principle of "quality initially, services first, steady improvement and innovation to fulfill the customers" for your management and "zero defect, zero complaints" as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Manufacturer for Pressure Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko, The product will supply to all over the world, such as: Hamburg, Pretoria, Argentina, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Phoenix from Provence - 2018.06.18 17:25
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Denise from Saudi Arabia - 2017.04.08 14:55
