High Quality Wim Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko

Short Description:

Product Detail

Product Tags

Feedback (2)

We have probably the most state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for Saw Torque Sensor, Pressure Calibration Equipment, How To Measure Camber, We welcome new and outdated clients from all walks of daily life to get hold of us for long term organization associations and achieving mutual results!

High Quality Wim Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko Detail:

Technical Parameters

Cross section dimensions	（48mm+58mm）*58 mm
Length	1m, 1.5m, 1.75m, 2m
Wheel weighing range	0.05T～35T
Overload capacity	150%FS
Load sensitivity	2±5%pC/N
Speed range	（0.5～100）km/h
Protection grade	IP68	Output impedance	>1010Ω
Working temp.	-45～80℃	Output temperature effect	<0.04%FS/ ℃
Electrical connection	High frequency static noise coaxial cable
Bearing surface	Bearing surface can be polished
Nonlinear	≤±2% FS (precision of static calibration of sensors at each point)
Consistency	≤±4% FS (static calibration accuracy of different position points of the sensor)
Repetitiveness	≤±2% FS (precision of static calibration of sensors at the same position)
Integrated precision error	≤±5%

Installation Method

Installation Notices

5.1It is strictly prohibited to use the sensor beyond range and operating temperature for a long time.
5.2It is strictly prohibited to measure the insulation resistance of the sensor with a high resistance meter above 1000V.
5.3Non-professional personnel are strictly prohibited to verify it.
5.4The measuring medium should be compatible with aluminum materials, otherwise special instructions are required when ordering.
5.5The output end of sensor L5/Q9 should be kept dry and clean during measurement, otherwise the signal output is unstable.
5.6The pressure surface of the sensor shall not be struck with a blunt instrument or heavy force.
5.7The bandwidth of the charge amplifier shall be higher than that of the sensor, except there is no special requirement for frequency response.
5.8The installation of sensors should be carried out in strict accordance with the relevant requirements of the instructions in order to achieve accurate measurement.
5.9If there is strong electromagnetic interference near the measurement, certain shielding measures should be taken.
5.10The cable of the sensor and the charge amplifier must use a coaxial cable with high frequency static noise.

Attachments

Manual 1 PCS
Qualification of verification 1 PCS Certificate 1 PCS
Hangtag 1 PCS
Q9 output cable 1 PCS

Product detail pictures:

Related Product Guide:

We provide fantastic energy in top quality and advancement,merchandising,gross sales and marketing and operation for High Quality Wim Sensor - Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko, The product will supply to all over the world, such as: Wellington, Kenya, Tunisia, Our company absorbs new ideas, strict quality control, a full range of service tracking, and adhere to make high-quality products. Our business aims to "honest and trustworthy, favorable price, customer first", so we won the trust of the majority of customers! If you are interested in our products and services, please do not hesitate to contact us!

Accelerometer Sensor Working