Fast delivery Piezo Sensor – Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko

Short Description:

Product Detail

Product Tags

Feedback (2)

It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Track Brake, Data Acquisition, Traffic Curtain, We are looking forward to receiving your enquiries soon.

Fast delivery Piezo Sensor – Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko Detail:

Technical Parameters

Cross section dimensions	（48mm+58mm）*58 mm
Length	1m, 1.5m, 1.75m, 2m
Wheel weighing range	0.05T～35T
Overload capacity	150%FS
Load sensitivity	2±5%pC/N
Speed range	（0.5～100）km/h
Protection grade	IP68	Output impedance	>1010Ω
Working temp.	-45～80℃	Output temperature effect	<0.04%FS/ ℃
Electrical connection	High frequency static noise coaxial cable
Bearing surface	Bearing surface can be polished
Nonlinear	≤±2% FS (precision of static calibration of sensors at each point)
Consistency	≤±4% FS (static calibration accuracy of different position points of the sensor)
Repetitiveness	≤±2% FS (precision of static calibration of sensors at the same position)
Integrated precision error	≤±5%

Installation Method

Installation Notices

5.1It is strictly prohibited to use the sensor beyond range and operating temperature for a long time.
5.2It is strictly prohibited to measure the insulation resistance of the sensor with a high resistance meter above 1000V.
5.3Non-professional personnel are strictly prohibited to verify it.
5.4The measuring medium should be compatible with aluminum materials, otherwise special instructions are required when ordering.
5.5The output end of sensor L5/Q9 should be kept dry and clean during measurement, otherwise the signal output is unstable.
5.6The pressure surface of the sensor shall not be struck with a blunt instrument or heavy force.
5.7The bandwidth of the charge amplifier shall be higher than that of the sensor, except there is no special requirement for frequency response.
5.8The installation of sensors should be carried out in strict accordance with the relevant requirements of the instructions in order to achieve accurate measurement.
5.9If there is strong electromagnetic interference near the measurement, certain shielding measures should be taken.
5.10The cable of the sensor and the charge amplifier must use a coaxial cable with high frequency static noise.

Attachments

Manual 1 PCS
Qualification of verification 1 PCS Certificate 1 PCS
Hangtag 1 PCS
Q9 output cable 1 PCS

Product detail pictures:

Related Product Guide:

As a way to finest meet up with client's wants, all of our operations are strictly performed in line with our motto "High Quality, Aggressive Price, Fast Service" for Fast delivery Piezo Sensor – Piezoelectric Quartz Dynamic Weighing Sensor CET8312 – Enviko, The product will supply to all over the world, such as: Oslo, New Orleans, Croatia, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.

Accelerometer Sensor